Showing posts with label kit. Show all posts
Showing posts with label kit. Show all posts

Sunday, 31 January 2016

West Wings "de Havilland D.H. 80A Puss Moth"

Back in May last year I received a West Wings D.H. 80A Puss Moth scale free flight kit for my birthday.  I've refrained from opening the kit and starting it until I completed my Wakefield, which took far longer to finish than I expected.  Now that model is completed, I can at at last get cracking on this fun little plane.

I normally really enjoy West Wings kits (they make nice presents, hint hint), their models are well designed, easy and interesting to build and the kits contain quality plans and materials.  This model has a 24.5" wingspan and is complete with appropriately coloured blue and silver tissue and decals.


The design looks very promising with high wing mount, large wing area and hopefully low weight, it should be stable flier.  Although I'm going to keep to the rubber powered design, apparently some folk have converted it to electric power, so that looks like an interesting option to try out if I attempt a second build.  Hopefully I can get this one built before Summer 2016 arrives!

Tuesday, 3 June 2014

36" Wingspan Miss Canada Senior

My previous balsa kit build was a rather diminutive scale model.  To make a change, I decided my next kit would be a large free flight aircraft, this time an EasyBuilt 36" wingspan vintage Miss Canada Senior.   This is a typical box fuselage rubber powered model with a rugged and rather chunky design.  I'm not sure about the aesthetics, but I think the flying performance may show some promise.


The balsa appears to be well graded and chosen carefully, the only minor quibble was the slight damage to the tip of the propeller, but I am sure I can work around that.   I will report back as I get to grips with the construction of this vintage gem.

Sunday, 9 February 2014

Bird-Dog build now complete!

After a week of cutting, gluing and sanding I completed the construction phase of the Guillow's Bird-Dog.  This 18" wing span monoplane is a relatively easy build.  I added some of my own small modifications, such as some wing strengtheners and gussets as well as hand carved balsa nose as the vacuum formed plastic version was rather flimsy.  Instead of using card for the fillets around the cabin I used 1/32" balsa sheet.   The next task is to cover it with tissue..



Sunday, 5 January 2014

West Wings Aries

I've been cracking on with the construction of the West Wings Aries and I now have the majority of the aircraft now completed.  I just need to accurately drill some holes to hold the dowels in place and add a few more gussets in the wings for extra strength.

To make the fuselage more rigid I added some sheet balsa to the underside of the nose and made the box framework between the wings stronger.  This only adds a small amount of weight and hopefully will result in a tougher airframe.


So a few more hours work of final touches and the next step will be the covering...

Friday, 3 January 2014

West Wings Aries

West Wings Aries
I received a West Wings Aries for Christmas to keep me busy during the Winter months.  This is a relatively easy model and promises to be a slow but steady flyer.   This kit is almost identical to the West Wings Topaz, apart from the additional wing.  If the Aries works out well, I may tweak the plans and build an Aries from scratch.

The balsa wood is cut well, however, this kit was missing the trailing edges for the wings and tailplane which was a big disappointment.  Fortunately I have plenty of sheet balsa spare, so I can cut these myself, however, I did feel a little let down by this lack of quality control.

I've constructed the tailplane and I'm now working on the fuselage which I hope to complete by the end of this weekend.   Onwards and upwards!

Monday, 30 December 2013

West Wings Merlin, completed at last!

Back in October I started constructing a West Wings Merlin glider, however, I got distracted and never got around to finally completing this kit.  I refrained from any fancy paint job as I wanted to keep as light and clean looking as possible, sometimes less is more.

Over the Christmas holidays I managed to find a spare couple of hours to make a new tail (since the last one warped during the final doping) and to finally glue in the wing and tail-plane dowels.

I am rather pleased with the final result.  I just need to balance and trim the glider and give it a go once Spring arrives and the winter storms are behind us.




Thursday, 4 July 2013

Completed Sapphire

I managed to find some spare moments to cover the Sapphire with yellow tissue and apply some cellulose dope. Once this was completely dry, I drilled some 3mm holes and fitted the dowels for the wings and rubber motor.  My minor gripe was that the dowel provided was less than generous, but fortunately I had some spare from a previous kit.




The final steps were to fix the wheels, add in the windshield and get the propeller nose block finished.  The nose block balsa was a little softer than I expected so I ended up sanding it just slightly too much, so I may redo this at a later date.

All in all, not a bad little kit. Straight forward to assemble, the majority of the parts were very good quality and the instructions and plans were excellent.  It didn't take too long to build and it was an enjoyable experience.  I just now need some fine weather to fly it!

Monday, 24 June 2013

Sapphire Wing Construction

Last week I was given a West Wings Sapphire 32.5" wingspan rubber powered model aeroplane kit for Father's Day, however, due to a really busy week I only managed to some free time on Sunday to start it.

With most models I normally construct the wings first. This model has two large wing tips and a main wing.  It was a relatively easy build. First, I pinned the plans down to a board, wax the paper to prevent glue sticking to it.

The ribs were pre-cut, so it was a case of popping them out of the cut sheet and tidying them up. The leading edge required cutting the 3 mm x 6 mm down to 3 mm x 5 mm and sanding down the front two corners to make a leading edge profile.  The trailing edge required notches to be cut about 1.8mm deep to accommodate the end of the wing ribs.  There is some under-camber to the ribs that required the front underside of the trailing edge to be wedged up by 1.5mm before pinning it down and gluing in the ribs and then the spars.


I took an enjoyably slow paced two hours to finish the build.  I'll try to find time this week to build the wing tips and finish the wing.

Sunday, 16 June 2013

West Wings Sapphire

This year my kids gave me a West Wings Sapphire for Father's day.  This is a 32.5" (825mm) wingspan rubber powered sports aeroplane that apparently has high lift and good stability as well as promising some long duration flights.


Inside the box:



The quality of the wood looks good, the plans are clear and the instructions are well thought out and easy to follow.  It looks like it will be an enjoyable build.  The West Wings website does mention that one can finish this model with heat-shrink covering, but I will stick to the traditional tissue and dope finish.

Not a bad kit at all.  I've never built a West Wings kit before, so I look forward to seeing how well it builds and performs in the air.  My only quibble is that it came with a rather chunky yellow propeller rather than the more aesthetically pleasing blue one as shown on the box.