Showing posts with label chuck gliders. Show all posts
Showing posts with label chuck gliders. Show all posts

Monday, 16 March 2015

Sparrowhawk chuck glider

After an earlier discussion about designing a balsa aeroplane my son later in the day presented me with his design of a chuck glider.  We had to see if it could easily be made and if it would fly.

Out of some 1/16" sheet balsa scraps I cut some 1/16" x 1/16", 1/16" x 3/16" strips for wing ribs and leading and trailing edges.  I cut 4 lengths of 1/16" x 1/4" x 10cm strips that we laminated to make a rigid stick fuselage.   We used some scrap tissue for wing and tail covering and by the end of the weekend we had a chuck glider that just needed a small amount of Blu-Tak for a nose weight and it flew perfectly!



I tidied up plans and they are available below:



Fuselage: 10" long, 4 laminates of 1/4" x 1/16th sheet.
Tail fin: 1.5" high, 1.5" long from 3/16" x 1/16th sheet.
Tail wing: 2" wingspan, 1" triangles from 3/16" x 1/16th sheet.
Wings: 5" wingspan, 1 3/8" wings from 3/16" x 1/16th sheet (leading + trailing edges) and 1/16" x 1/16" sheet for the ribs and diagonals.