Showing posts with label gliders. Show all posts
Showing posts with label gliders. Show all posts

Monday, 30 December 2013

West Wings Merlin, completed at last!

Back in October I started constructing a West Wings Merlin glider, however, I got distracted and never got around to finally completing this kit.  I refrained from any fancy paint job as I wanted to keep as light and clean looking as possible, sometimes less is more.

Over the Christmas holidays I managed to find a spare couple of hours to make a new tail (since the last one warped during the final doping) and to finally glue in the wing and tail-plane dowels.

I am rather pleased with the final result.  I just need to balance and trim the glider and give it a go once Spring arrives and the winter storms are behind us.




Sunday, 6 October 2013

West Wings Merlin

Earlier in the year I purchased a rather old edition of the West Wings Merlin that had been languishing in the back of the local model shop for quite a few years.


I was hoping my son would build this, but it was a little too tricky for him so I decided to build it.   Like previous West Wings kit, the balsa is a good grade and well selected.  The plans are very easy to follow and in just a few hours of work I had the 35" wings and fuselage constructed and ready to cover.  Not bad at all, an excellent beginners model.  I just need some spare time to cover it and I will report back on how well it flies.

Saturday, 15 June 2013

Making an indoor balsa wood chuck glider

I've been meaning to teach my 10 year old son how to build balsa wood indoor chuck gliders for some time, so today we visited The Hobby Box, an excellent model shop in Uckfield, East Sussex, to purchase some balsa.


Materials list:
  • 1/16 x 3 x 36 inch balsa sheet for the wings (1.6 x 75 x 915 mm)
  • 3/32 x 3/32 x 36 inch square balsa strip for the fuselage (5 x 5 x 915 mm)
  • PVA wood glue
  • Metal ruler
  • Modelling knife
  • Fine sand paper
I created a design in metric because that's easier for the modern metric thinking child to deal with.

Components:
  • Fuselage: 25 cm of the 5 x 5 mm balsa strip.
  • Tail plane: 2 cm x  9 cm from the 1.6 mm balsa sheet.
  • Tail: 4 cm high x 2.5 cm base x 2 cm top trapezoid from the 1.6 mm balsa sheet.
  • Two main wings (left, right): 3 cm x 18 cm rectangles of the 1.6 mm balsa sheet.

Construction:

Cut the fuselage from the 5 x 5 mm balsa strip.  Cut out the tail plane and tail.  Glue the tail plane to the end of the fuselage. Gently sand to smooth the edges. We used tiny pins to hold it in place while drying.

When dry, glue the tail on top of the tail plane.  We used some Lego bricks to hold it vertical while drying:


Cut out two of the 3 cm x 18 cm main wings from the balsa sheet and glue these half way along the fuselage.  I decided to have about 3cm of dihedral so 3 Lego bricks to hold the wings into position while drying seem to do the trick:


We also glued a small slice of 1.6mm sheeting on top of the wings to add a little more strength on the join.

Finally, add a small blob of Blu-Tack or plasticine to the nose to balance the chuck glider.  Ensure the chuck glider balances when one holds the plane with a finger under each wing tip.  Add more weight if it stalls, remove weight if it nose dives.

My son built the chuck glider in the pictures under my instruction.  It was the first time he had used a metal ruler and a modelling knife for cutting, so some help was required to get him to cut straight and confidently.   After he was happy with the tailplane he measured and cut the tail and wings all by himself.  I explained the way to trim the glider and in no time he had it flying perfectly.

By our reckoning these cost about 50 pence per glider to build.  Not bad at all.

Saturday, 8 June 2013

Fixing my Veron Domino glider

Quite a few years ago my brother kindly purchased me a Veron Domino glider kit for my birthday.  This was the same glider I built many years ago when I was a teenager, so it was a delight to be able to re-live the building experience all over again.

The Domino is an A1 free flight glider, all-balsa (Jedelsky) construction sporting a decent 1190mm wingspan.   I took the liberty to give it a all-white gloss finish which turned out to be a rather winning look.   Unfortunately the glider was temporarily moved to the garage while our house underwent a rather radical loft conversion and got slightly damaged when a board fell on it.  I waited a year before looking at the damage as I really didn't want to face up to seeing how damaged the glider was.

Fortunately, the solid balsa wing lends itself to fixing fairly easily.  There were two breaks, one across the main left leading edge and the right wing tip had snapped off just above the join to the main wing. I administered suitable amounts of wood adhesive and used some stretchy insulating tape to hold the join while drying.  A few books were used to set the wing tip dihedral while the glue set.

Wing tip wedged between books while drying

Linux device drivers books come in quite handy
The main fuselage was broken in the same place my original snapped, so I guess this is a fundamental design flaw.  The fuselage is solid balsa, so it was a simple case of drilling two holes in each part and inserting a 4 inch dowel to reinforce the joint.

After gluing. I need to find some paint to finish it off.
Fuselage and tailplane need some cleaning.
Hopefully when I get some calm evening weather I will take it out for a quick flight to see if my fixes are adequate.  I will report back.